© 2020 Master Cutter Xy-380p Driver.
11
мар
Support > Software & Drivers
Cutting Plotters
Where and how to setup Vinyl Cutter, Plotter or other Device in VinylMaster. Where and how to setup Vinyl Cutter, Plotter or other Device in VinylMaster. Skip navigation. Setup a Chinese Cutter. Good afternoon everyone. I am a screen printer but have recently came across the desay master xy-380p and a heat press machine hp 380. I have no knowledge what soever about plotters or heat press but want to incorporate it into what i do already. I do not know what software goes along with the plotter or even what drivers.
Heiwa tokei cv drivers. HEIWA TOKEI CV PRINTER DRIVER DOWNLOAD - The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC. Try a driver checking tool such as DriverIdentifier Software. As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you can try one by on the list of available driver below. Please scroll down to find a latest utilities and drivers for your Heiwa Tokei CV driver. Heiwa Tokei CV driver free download for windows – HP – HP Pavilion 06. The pressure plate a is pressed against the clutch plate a by a compression spring a. I certify that I am authorized to sign this application.
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.Game pc train simulator bisa diamond.
Drivers
| Cutting Plotters | Windows Driver | ||||||
|---|---|---|---|---|---|---|---|
| Windows 7 (32-bits Edition) | Windows 8.1 (32-bits Edition) | Windows 10 (32-bits Edition) | Windows 7 (64-bits Edition) | Windows 8.1 (64-bits Edition) | Windows 10 (64-bits Edition) | Cprrespon- ding model | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS662 (v3.80) | OPS662 (v3.90) | OPS662 (v3.80) | OPS662 (v3.90) | CE6000 | ||
| CE6000-120AP | OPS628 (v10.20) | OPS628 (v10.30) | OPS628 (v10.20) | OPS628 (v10.30) | CE6000 | ||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS662 (v3.80) | OPS662 (v3.90) | OPS662 (v3.80) | OPS662 (v3.90) | FC8600 | ||
| FC2250-60 FC2250-120 FC2250-180 | FC2250 | ||||||
| FC4500-50 FC4510-60 FC4550-50 | FC4500 | ||||||
| CE2000-60 CE2000-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | CE2000 | ||
| CE2000-120AP | CE2000 | ||||||
| CE3000-40 CE3000-60 CE3000-120 | CE3000 | ||||||
| CE3000-120AP | CE3000 | ||||||
| CE3000Mk2-60 CE3000Mk2-120 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | CE3000Mk2 | ||
| CE5000-60 CE5000-120 | OPS662 (v3.00) | OPS662 (v3.00) | CE5000 | ||||
| CE5000-120AP | OPS628 (v10.20) | OPS628 (v10.20) | CE5000 | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC2230 | ||
| FC2240-60 FC2240-120 FC2240-180 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC2240 | ||
| FC3600-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC3600 | ||
| FC4200-50 FC4200-60 FC4210-60 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC4200 | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC5100 | ||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | FC5100 | ||||||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC7000 | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | FC7000 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS662 (v3.00) | OPS662 (v3.00) | FC8000 | ||||
| FC612-09 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC612 | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
| Cutting Plotters | Cutting Plotter Controller | ROBO Master Pro | D-Cut Master | |||
|---|---|---|---|---|---|---|
| Windows 7 / 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS676 (v1.40B) | N/A | N/A | |||
| Firmware version 1.60 is required (CE6000 Firmware v2.61) Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01) | ||||||
| CE6000-120AP | N/A | N/A | N/A | |||
| Firmware version v1.50 is required (CE6000-120AP Firmware v2.00) User manual for CE6000-120AP (CE6000AP-UM-152-01) | ||||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC2250-60 FC2250-120 FC2250-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC4500-50 FC4510-60 FC4550-50 | ||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | |||
| CE2000-120AP | N/A | N/A | N/A | |||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | |||
| CE3000-120AP | N/A | N/A | N/A | |||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | |||
| CE5000-60 CE5000-120 | OPS664 (v2.20B) | OPS661 (v4.60) | N/A | N/A | ||
| CE5000-120AP | N/A | N/A | N/A | |||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC3600-120 | N/A | N/A | N/A | |||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | |||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | |||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS664 (v2.20B) | N/A | N/A | N/A | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC612-09 | N/A | N/A | OPS639 (v2.12) | N/A | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
| Cutting Plotters | Cutting Master 4 | Graphtec Pro Studio | |
|---|---|---|---|
| Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | Macintosh OS10.7 - 10.15 | Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | |
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| FC4500-50 FC4510-60 FC4550-50 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| Cutting Plotters | Cutting Master 2 | Cutting Master 3 | Graphtec Studio | ||||
|---|---|---|---|---|---|---|---|
| Windows 7/ 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Macintosh OS10.4 - 10.10 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.5 -10.11 macOS 10.12 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.6 -10.15 | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| CE6000-120AP | N/A | N/A | N/A | ||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 2.10 or later is required (FC8600 Firmware v3.10) | |||||||
| FC2250-60 FC2250-120 FC2250-180 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.90 or later is required (FC2250 Firmware v4.50) | |||||||
| FC4500-50 FC4510-60 FC4550-50 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 1.92 or later is required (FC4500 Firmware v2.70) | |||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | ||||
| CE2000-120AP | N/A | N/A | N/A | ||||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | ||||
| CE3000-120AP | N/A | N/A | N/A | ||||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | ||||
| CE5000-60 CE5000-120 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows> | Graphtec Studio for Macintosh |
| When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00) When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40) | |||||||
| CE5000-120AP | N/A | N/A | N/A | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | N/A | ||||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | N/A | ||||
| FC3600-120 | N/A | N/A | N/A | ||||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | N/A | ||||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | ||||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | ||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.10 or later is required (FC8000 Firmware v3.50) | |||||||
| FC612-09 | N/A | N/A | N/A | ||||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.
Popular Posts
Support > Software & Drivers
Cutting Plotters
Where and how to setup Vinyl Cutter, Plotter or other Device in VinylMaster. Where and how to setup Vinyl Cutter, Plotter or other Device in VinylMaster. Skip navigation. Setup a Chinese Cutter. Good afternoon everyone. I am a screen printer but have recently came across the desay master xy-380p and a heat press machine hp 380. I have no knowledge what soever about plotters or heat press but want to incorporate it into what i do already. I do not know what software goes along with the plotter or even what drivers.
Heiwa tokei cv drivers. HEIWA TOKEI CV PRINTER DRIVER DOWNLOAD - The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC. Try a driver checking tool such as DriverIdentifier Software. As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you can try one by on the list of available driver below. Please scroll down to find a latest utilities and drivers for your Heiwa Tokei CV driver. Heiwa Tokei CV driver free download for windows – HP – HP Pavilion 06. The pressure plate a is pressed against the clutch plate a by a compression spring a. I certify that I am authorized to sign this application.
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.Game pc train simulator bisa diamond.Drivers
Cutting Plotters Windows Driver Windows
7
(32-bits Edition)Windows
8.1
(32-bits Edition)Windows
10
(32-bits Edition)Windows
7
(64-bits Edition)Windows
8.1
(64-bits Edition)Windows
10
(64-bits Edition)Cprrespon- ding model CE6000-40
CE6000-60
CE6000-120
CE6000-120AMOOPS662 (v3.80) OPS662 (v3.90) OPS662 (v3.80) OPS662 (v3.90) CE6000 CE6000-120AP OPS628 (v10.20) OPS628 (v10.30) OPS628 (v10.20) OPS628 (v10.30) CE6000 FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160OPS662 (v3.80) OPS662 (v3.90) OPS662 (v3.80) OPS662 (v3.90) FC8600 FC2250-60
FC2250-120
FC2250-180FC2250 FC4500-50
FC4510-60
FC4550-50FC4500 CE2000-60
CE2000-120OPS628 (v10.20) N/A OPS628 (v10.20) N/A CE2000 CE2000-120AP CE2000 CE3000-40
CE3000-60
CE3000-120CE3000 CE3000-120AP CE3000 CE3000Mk2-60
CE3000Mk2-120OPS662 (v3.00) N/A OPS662 (v3.00) N/A CE3000Mk2 CE5000-60
CE5000-120OPS662 (v3.00) OPS662 (v3.00) CE5000 CE5000-120AP OPS628 (v10.20) OPS628 (v10.20) CE5000 FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EXOPS628 (v10.20) N/A OPS628 (v10.20) N/A FC2230 FC2240-60
FC2240-120
FC2240-180OPS662 (v3.00) N/A OPS662 (v3.00) N/A FC2240 FC3600-120 OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC3600 FC4200-50
FC4200-60
FC4210-60OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC4200 FC5100-75
FC5100-100
FC5100-130
FC5100-150OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC5100 FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150FC5100 FC7000-75
FC7000-100
FC7000-130
FC7000-160OPS662 (v3.00) N/A OPS662 (v3.00) N/A FC7000 FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160FC7000 FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160OPS662 (v3.00) OPS662 (v3.00) FC8000 FC612-09 OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC612 Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
Cutting Plotters Cutting Plotter Controller ROBO Master Pro D-Cut Master Windows
7 / 8.1
(32 & 64-bits Edition)Windows
10
(32 & 64-bits Edition)Windows
7
(32 & 64-bits Edition)Windows
8.1 / 10
(32 & 64-bits Edition)Windows
7
(32 & 64-bits Edition)Windows
8.1 / 10
(32 & 64-bits Edition)CE6000-40
CE6000-60
CE6000-120
CE6000-120AMOOPS676 (v1.40B) N/A N/A Firmware version 1.60 is required (CE6000 Firmware v2.61)
Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01)CE6000-120AP N/A N/A N/A Firmware version v1.50 is required (CE6000-120AP Firmware v2.00)
User manual for CE6000-120AP (CE6000AP-UM-152-01)FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160OPS675 (v1.50B) N/A N/A FC2250-60
FC2250-120
FC2250-180N/A N/A OPS639 (v2.12) N/A FC4500-50
FC4510-60
FC4550-50CE2000-60
CE2000-120N/A N/A N/A CE2000-120AP N/A N/A N/A CE3000-40
CE3000-60
CE3000-120N/A N/A N/A CE3000-120AP N/A N/A N/A CE3000Mk2-60
CE3000Mk2-120N/A N/A N/A CE5000-60
CE5000-120OPS664 (v2.20B) OPS661 (v4.60) N/A N/A CE5000-120AP N/A N/A N/A FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EXN/A N/A OPS639 (v2.12) N/A FC2240-60
FC2240-120
FC2240-180N/A N/A OPS639 (v2.12) N/A FC3600-120 N/A N/A N/A FC4200-50
FC4200-60
FC4210-60N/A N/A OPS639 (v2.12) N/A FC5100-75
FC5100-100
FC5100-130
FC5100-150N/A N/A N/A FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150N/A N/A N/A FC7000-75
FC7000-100
FC7000-130
FC7000-160OPS664 (v2.20B) N/A N/A N/A FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160OPS675 (v1.50B) N/A N/A FC612-09 N/A N/A OPS639 (v2.12) N/A Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
Cutting Plotters Cutting Master 4 Graphtec Pro Studio Windows
7 / 8.1 / 10
(32 & 64-bits Edition)Macintosh
OS10.7 - 10.15Windows
7 / 8.1 / 10
(32 & 64-bits Edition)FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160Cutting Master 4
for WindowsCutting Master 4
for MacintoshGraphtec Pro Studio
for WindowsFC4500-50
FC4510-60
FC4550-50Cutting Master 4
for WindowsCutting Master 4
for MacintoshGraphtec Pro Studio
for WindowsCutting Plotters Cutting Master 2 Cutting Master 3 Graphtec Studio Windows
7/ 8.1
(32 & 64-bits Edition)Windows
10
(32 & 64-bits Edition)Macintosh
OS10.4 - 10.10Windows
7/ 8.1/ 10
(32 & 64-bits Edition)Macintosh
OS10.5 -10.11
macOS 10.12Windows
7/ 8.1/ 10
(32 & 64-bits Edition)Macintosh
OS10.6 -10.15CE6000-40
CE6000-60
CE6000-120
CE6000-120AMOC-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshCE6000-120AP N/A N/A N/A FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 2.10 or later is required (FC8600 Firmware v3.10) FC2250-60
FC2250-120
FC2250-180C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 3.90 or later is required (FC2250 Firmware v4.50) FC4500-50
FC4510-60
FC4550-50C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 1.92 or later is required (FC4500 Firmware v2.70) CE2000-60
CE2000-120N/A N/A N/A CE2000-120AP N/A N/A N/A CE3000-40
CE3000-60
CE3000-120N/A N/A N/A CE3000-120AP N/A N/A N/A CE3000Mk2-60
CE3000Mk2-120N/A N/A N/A CE5000-60
CE5000-120C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for Windows>Graphtec Studio
for MacintoshWhen current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00)
When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40)CE5000-120AP N/A N/A N/A FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EXN/A N/A N/A FC2240-60
FC2240-120
FC2240-180N/A N/A N/A FC3600-120 N/A N/A N/A FC4200-50
FC4200-60
FC4210-60N/A N/A N/A FC5100-75
FC5100-100
FC5100-130
FC5100-150N/A N/A N/A FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150N/A N/A N/A FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 3.10 or later is required (FC8000 Firmware v3.50) FC612-09 N/A N/A N/A Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.
Support > Software & Drivers
Cutting Plotters
Where and how to setup Vinyl Cutter, Plotter or other Device in VinylMaster. Where and how to setup Vinyl Cutter, Plotter or other Device in VinylMaster. Skip navigation. Setup a Chinese Cutter. Good afternoon everyone. I am a screen printer but have recently came across the desay master xy-380p and a heat press machine hp 380. I have no knowledge what soever about plotters or heat press but want to incorporate it into what i do already. I do not know what software goes along with the plotter or even what drivers.
Heiwa tokei cv drivers. HEIWA TOKEI CV PRINTER DRIVER DOWNLOAD - The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC. Try a driver checking tool such as DriverIdentifier Software. As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you can try one by on the list of available driver below. Please scroll down to find a latest utilities and drivers for your Heiwa Tokei CV driver. Heiwa Tokei CV driver free download for windows – HP – HP Pavilion 06. The pressure plate a is pressed against the clutch plate a by a compression spring a. I certify that I am authorized to sign this application.
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.Game pc train simulator bisa diamond.Drivers
Cutting Plotters Windows Driver Windows
7
(32-bits Edition)Windows
8.1
(32-bits Edition)Windows
10
(32-bits Edition)Windows
7
(64-bits Edition)Windows
8.1
(64-bits Edition)Windows
10
(64-bits Edition)Cprrespon- ding model CE6000-40
CE6000-60
CE6000-120
CE6000-120AMOOPS662 (v3.80) OPS662 (v3.90) OPS662 (v3.80) OPS662 (v3.90) CE6000 CE6000-120AP OPS628 (v10.20) OPS628 (v10.30) OPS628 (v10.20) OPS628 (v10.30) CE6000 FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160OPS662 (v3.80) OPS662 (v3.90) OPS662 (v3.80) OPS662 (v3.90) FC8600 FC2250-60
FC2250-120
FC2250-180FC2250 FC4500-50
FC4510-60
FC4550-50FC4500 CE2000-60
CE2000-120OPS628 (v10.20) N/A OPS628 (v10.20) N/A CE2000 CE2000-120AP CE2000 CE3000-40
CE3000-60
CE3000-120CE3000 CE3000-120AP CE3000 CE3000Mk2-60
CE3000Mk2-120OPS662 (v3.00) N/A OPS662 (v3.00) N/A CE3000Mk2 CE5000-60
CE5000-120OPS662 (v3.00) OPS662 (v3.00) CE5000 CE5000-120AP OPS628 (v10.20) OPS628 (v10.20) CE5000 FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EXOPS628 (v10.20) N/A OPS628 (v10.20) N/A FC2230 FC2240-60
FC2240-120
FC2240-180OPS662 (v3.00) N/A OPS662 (v3.00) N/A FC2240 FC3600-120 OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC3600 FC4200-50
FC4200-60
FC4210-60OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC4200 FC5100-75
FC5100-100
FC5100-130
FC5100-150OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC5100 FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150FC5100 FC7000-75
FC7000-100
FC7000-130
FC7000-160OPS662 (v3.00) N/A OPS662 (v3.00) N/A FC7000 FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160FC7000 FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160OPS662 (v3.00) OPS662 (v3.00) FC8000 FC612-09 OPS628 (v10.20) N/A OPS628 (v10.20) N/A FC612 Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
Cutting Plotters Cutting Plotter Controller ROBO Master Pro D-Cut Master Windows
7 / 8.1
(32 & 64-bits Edition)Windows
10
(32 & 64-bits Edition)Windows
7
(32 & 64-bits Edition)Windows
8.1 / 10
(32 & 64-bits Edition)Windows
7
(32 & 64-bits Edition)Windows
8.1 / 10
(32 & 64-bits Edition)CE6000-40
CE6000-60
CE6000-120
CE6000-120AMOOPS676 (v1.40B) N/A N/A Firmware version 1.60 is required (CE6000 Firmware v2.61)
Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01)CE6000-120AP N/A N/A N/A Firmware version v1.50 is required (CE6000-120AP Firmware v2.00)
User manual for CE6000-120AP (CE6000AP-UM-152-01)FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160OPS675 (v1.50B) N/A N/A FC2250-60
FC2250-120
FC2250-180N/A N/A OPS639 (v2.12) N/A FC4500-50
FC4510-60
FC4550-50CE2000-60
CE2000-120N/A N/A N/A CE2000-120AP N/A N/A N/A CE3000-40
CE3000-60
CE3000-120N/A N/A N/A CE3000-120AP N/A N/A N/A CE3000Mk2-60
CE3000Mk2-120N/A N/A N/A CE5000-60
CE5000-120OPS664 (v2.20B) OPS661 (v4.60) N/A N/A CE5000-120AP N/A N/A N/A FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EXN/A N/A OPS639 (v2.12) N/A FC2240-60
FC2240-120
FC2240-180N/A N/A OPS639 (v2.12) N/A FC3600-120 N/A N/A N/A FC4200-50
FC4200-60
FC4210-60N/A N/A OPS639 (v2.12) N/A FC5100-75
FC5100-100
FC5100-130
FC5100-150N/A N/A N/A FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150N/A N/A N/A FC7000-75
FC7000-100
FC7000-130
FC7000-160OPS664 (v2.20B) N/A N/A N/A FC7000Mk2-60
FC7000Mk2-75
FC7000Mk2-100
FC7000Mk2-130
FC7000Mk2-160FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160OPS675 (v1.50B) N/A N/A FC612-09 N/A N/A OPS639 (v2.12) N/A Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
Cutting Plotters Cutting Master 4 Graphtec Pro Studio Windows
7 / 8.1 / 10
(32 & 64-bits Edition)Macintosh
OS10.7 - 10.15Windows
7 / 8.1 / 10
(32 & 64-bits Edition)FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160Cutting Master 4
for WindowsCutting Master 4
for MacintoshGraphtec Pro Studio
for WindowsFC4500-50
FC4510-60
FC4550-50Cutting Master 4
for WindowsCutting Master 4
for MacintoshGraphtec Pro Studio
for WindowsCutting Plotters Cutting Master 2 Cutting Master 3 Graphtec Studio Windows
7/ 8.1
(32 & 64-bits Edition)Windows
10
(32 & 64-bits Edition)Macintosh
OS10.4 - 10.10Windows
7/ 8.1/ 10
(32 & 64-bits Edition)Macintosh
OS10.5 -10.11
macOS 10.12Windows
7/ 8.1/ 10
(32 & 64-bits Edition)Macintosh
OS10.6 -10.15CE6000-40
CE6000-60
CE6000-120
CE6000-120AMOC-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshCE6000-120AP N/A N/A N/A FC8600-60
FC8600-75
FC8600-100
FC8600-130
FC8600-160C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 2.10 or later is required (FC8600 Firmware v3.10) FC2250-60
FC2250-120
FC2250-180C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 3.90 or later is required (FC2250 Firmware v4.50) FC4500-50
FC4510-60
FC4550-50C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 1.92 or later is required (FC4500 Firmware v2.70) CE2000-60
CE2000-120N/A N/A N/A CE2000-120AP N/A N/A N/A CE3000-40
CE3000-60
CE3000-120N/A N/A N/A CE3000-120AP N/A N/A N/A CE3000Mk2-60
CE3000Mk2-120N/A N/A N/A CE5000-60
CE5000-120C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for Windows>Graphtec Studio
for MacintoshWhen current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00)
When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40)CE5000-120AP N/A N/A N/A FC2231-60
FC2231-90
FC2321-EX
FC2232-60
FC2232-90
FC2232-EXN/A N/A N/A FC2240-60
FC2240-120
FC2240-180N/A N/A N/A FC3600-120 N/A N/A N/A FC4200-50
FC4200-60
FC4210-60N/A N/A N/A FC5100-75
FC5100-100
FC5100-130
FC5100-150N/A N/A N/A FC5100A-75
FC5100A-100
FC5100A-130
FC5100A-150N/A N/A N/A FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160C-Master2(W) (v2.00) TBD C-Master2(M) (v1.99) Cutting Master 3
for WindowsCutting Master 3
for MacintoshGraphtec Studio
for WindowsGraphtec Studio
for MacintoshFirmware version 3.10 or later is required (FC8000 Firmware v3.50) FC612-09 N/A N/A N/A Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.