© 2020 Multiscan Ecu Cracked Feet.
14
апр
Hello
After it arrived I downloaded the driver from the sellers link. When I tried to install it it wouldn't accept the driver so I had to Google the device ID and found that it is a Winchiphead 340/341 USB to serial converter which I managed to locate and download. Windows picked up these drivers for the cable successfully and it now shows under Ports in Device Manager as 'USB-SERIAL CH340' on COM4.
I connected it to my Fiat Stilo 1.2 16v 5 door 2002 model and started Multiecuscan. I selected the make as Fiat and the model as STILO 1.2 16V and chose the Engine as the system and the default BOSCH MOTRONIC ME7.3H4M EOBD INJECTION as the ECU and clicked on CONNECT (with the key turned to power up the electrics but without the engine running). It showed CONNECTING TO ECU .. for about 30 seconds and then returned 'NO ECU RESPONSE Check your cable and serial port settings'.
I ran the connectivity test and it showed the following:
Test:
VagCom/KKL
Testing latency with 200 bytes of data..
Min latency: 3
Max latency: 21
Testing timers ..
(The acceptable tolerance for results is ~5ms)
System supports high resolution timer
Testing timer with 1000ms.
.result: 1002ms
Testing timer with 250ms..
The operation has timed out.
I installed the VAG-COM 409.1-S software and ran a test there with the following results:
Port Status: OK
Interface: Found!
Type: Serial Pass-Through
Opto/ISO: No
Ross-Tech Design: No
The VAG-COM software returns the following when I try and connect to the 01 ENGINE section:
Init Controller .. No response from controller
I have the port set to the following settings in Device Manager/Ports for COM4:
Bps: 9600bps
Data: 8-Bits
Parity: None
Stop Bits: 1
Flow Control: None
Advanced Section:
FIFO Buffers: Tried both ON (with Receive: High (14) Transmit: High (16) and OFF
I even tried Hyperterminal in Windows XP on the COM4 port but all it does it wait for ages after I send a command and then returns to a blank screen.
Can someone please help me to get this cable to connect as nothing I am trying seems to work? I'm not sure if it is the cable, the driver or my laptop that is the problem.
Many Thanks
After drying to constant weight measure the dry weight. Encountering with gully or foot of the river slope or slopes of the saturated. Extracting features of the received information, ECU commands the knowledge base. Jesus the jew geza vermes pdf merge. Structure, FP-Tree, representing frequent patterns, that reduces the multi-scan times. VCDS Multiscan Auto Intern. Sell your ecu related item's here,Software & Hardware please no cracked software. Forum rules Selling requires you to follow these simple rules: - You are not allowed to sell anything unless you have Introduced yourself - Insert at least one real picture of the item you are selling.
I downloaded the latest version of Multiecuscan to my old laptop with Windows XP. I bought a cheapie KKL VAG-COM 409.1 USB cable from ebay (Auction ID:220586751884).After it arrived I downloaded the driver from the sellers link. When I tried to install it it wouldn't accept the driver so I had to Google the device ID and found that it is a Winchiphead 340/341 USB to serial converter which I managed to locate and download. Windows picked up these drivers for the cable successfully and it now shows under Ports in Device Manager as 'USB-SERIAL CH340' on COM4.
I connected it to my Fiat Stilo 1.2 16v 5 door 2002 model and started Multiecuscan. I selected the make as Fiat and the model as STILO 1.2 16V and chose the Engine as the system and the default BOSCH MOTRONIC ME7.3H4M EOBD INJECTION as the ECU and clicked on CONNECT (with the key turned to power up the electrics but without the engine running). It showed CONNECTING TO ECU .. for about 30 seconds and then returned 'NO ECU RESPONSE Check your cable and serial port settings'.
I ran the connectivity test and it showed the following:
Test:
VagCom/KKL
Testing latency with 200 bytes of data..
Min latency: 3Testing timers ..
(The acceptable tolerance for results is ~5ms)
System supports high resolution timer
Testing timer with 1000ms.
.result: 1002ms
Testing timer with 250ms..
The operation has timed out.
I installed the VAG-COM 409.1-S software and ran a test there with the following results:
Port Status: OK
Interface: Found!
Type: Serial Pass-Through
Opto/ISO: No
Ross-Tech Design: No
The VAG-COM software returns the following when I try and connect to the 01 ENGINE section:
Init Controller .. No response from controller
I have the port set to the following settings in Device Manager/Ports for COM4:
Bps: 9600bps
Data: 8-Bits
Parity: None
Stop Bits: 1
Flow Control: None
Advanced Section:
FIFO Buffers: Tried both ON (with Receive: High (14) Transmit: High (16) and OFF
I even tried Hyperterminal in Windows XP on the COM4 port but all it does it wait for ages after I send a command and then returns to a blank screen.
Can someone please help me to get this cable to connect as nothing I am trying seems to work? I'm not sure if it is the cable, the driver or my laptop that is the problem.
Many Thanks
Popular Posts
- Hello
After drying to constant weight measure the dry weight. Encountering with gully or foot of the river slope or slopes of the saturated. Extracting features of the received information, ECU commands the knowledge base. Jesus the jew geza vermes pdf merge. Structure, FP-Tree, representing frequent patterns, that reduces the multi-scan times. VCDS Multiscan Auto Intern. Sell your ecu related item\'s here,Software & Hardware please no cracked software. Forum rules Selling requires you to follow these simple rules: - You are not allowed to sell anything unless you have Introduced yourself - Insert at least one real picture of the item you are selling.
I downloaded the latest version of Multiecuscan to my old laptop with Windows XP. I bought a cheapie KKL VAG-COM 409.1 USB cable from ebay (Auction ID:220586751884).
After it arrived I downloaded the driver from the sellers link. When I tried to install it it wouldn\'t accept the driver so I had to Google the device ID and found that it is a Winchiphead 340/341 USB to serial converter which I managed to locate and download. Windows picked up these drivers for the cable successfully and it now shows under Ports in Device Manager as \'USB-SERIAL CH340\' on COM4.
I connected it to my Fiat Stilo 1.2 16v 5 door 2002 model and started Multiecuscan. I selected the make as Fiat and the model as STILO 1.2 16V and chose the Engine as the system and the default BOSCH MOTRONIC ME7.3H4M EOBD INJECTION as the ECU and clicked on CONNECT (with the key turned to power up the electrics but without the engine running). It showed CONNECTING TO ECU .. for about 30 seconds and then returned \'NO ECU RESPONSE Check your cable and serial port settings\'.
I ran the connectivity test and it showed the following:
Test:
VagCom/KKL
Testing latency with 200 bytes of data..
Min latency: 3Max latency: 21
Testing timers ..
(The acceptable tolerance for results is ~5ms)
System supports high resolution timer
Testing timer with 1000ms.
.result: 1002ms
Testing timer with 250ms..
The operation has timed out.
I installed the VAG-COM 409.1-S software and ran a test there with the following results:
Port Status: OK
Interface: Found!
Type: Serial Pass-Through
Opto/ISO: No
Ross-Tech Design: No
The VAG-COM software returns the following when I try and connect to the 01 ENGINE section:
Init Controller .. No response from controller
I have the port set to the following settings in Device Manager/Ports for COM4:
Bps: 9600bps
Data: 8-Bits
Parity: None
Stop Bits: 1
Flow Control: None
Advanced Section:
FIFO Buffers: Tried both ON (with Receive: High (14) Transmit: High (16) and OFF
I even tried Hyperterminal in Windows XP on the COM4 port but all it does it wait for ages after I send a command and then returns to a blank screen.
Can someone please help me to get this cable to connect as nothing I am trying seems to work? I\'m not sure if it is the cable, the driver or my laptop that is the problem.
Many Thanks...'>Multiscan Ecu Cracked Feet(14.04.2020) - Hello
After drying to constant weight measure the dry weight. Encountering with gully or foot of the river slope or slopes of the saturated. Extracting features of the received information, ECU commands the knowledge base. Jesus the jew geza vermes pdf merge. Structure, FP-Tree, representing frequent patterns, that reduces the multi-scan times. VCDS Multiscan Auto Intern. Sell your ecu related item\'s here,Software & Hardware please no cracked software. Forum rules Selling requires you to follow these simple rules: - You are not allowed to sell anything unless you have Introduced yourself - Insert at least one real picture of the item you are selling.
I downloaded the latest version of Multiecuscan to my old laptop with Windows XP. I bought a cheapie KKL VAG-COM 409.1 USB cable from ebay (Auction ID:220586751884).
After it arrived I downloaded the driver from the sellers link. When I tried to install it it wouldn\'t accept the driver so I had to Google the device ID and found that it is a Winchiphead 340/341 USB to serial converter which I managed to locate and download. Windows picked up these drivers for the cable successfully and it now shows under Ports in Device Manager as \'USB-SERIAL CH340\' on COM4.
I connected it to my Fiat Stilo 1.2 16v 5 door 2002 model and started Multiecuscan. I selected the make as Fiat and the model as STILO 1.2 16V and chose the Engine as the system and the default BOSCH MOTRONIC ME7.3H4M EOBD INJECTION as the ECU and clicked on CONNECT (with the key turned to power up the electrics but without the engine running). It showed CONNECTING TO ECU .. for about 30 seconds and then returned \'NO ECU RESPONSE Check your cable and serial port settings\'.
I ran the connectivity test and it showed the following:
Test:
VagCom/KKL
Testing latency with 200 bytes of data..Min latency: 3
Testing timers ..
(The acceptable tolerance for results is ~5ms)
System supports high resolution timer
Testing timer with 1000ms.
.result: 1002ms
Testing timer with 250ms..
The operation has timed out.
I installed the VAG-COM 409.1-S software and ran a test there with the following results:
Port Status: OK
Interface: Found!
Type: Serial Pass-Through
Opto/ISO: No
Ross-Tech Design: No
The VAG-COM software returns the following when I try and connect to the 01 ENGINE section:
Init Controller .. No response from controller
I have the port set to the following settings in Device Manager/Ports for COM4:
Bps: 9600bps
Data: 8-Bits
Parity: None
Stop Bits: 1
Flow Control: None
Advanced Section:
FIFO Buffers: Tried both ON (with Receive: High (14) Transmit: High (16) and OFF
I even tried Hyperterminal in Windows XP on the COM4 port but all it does it wait for ages after I send a command and then returns to a blank screen.
Can someone please help me to get this cable to connect as nothing I am trying seems to work? I\'m not sure if it is the cable, the driver or my laptop that is the problem.
Many Thanks...'>Multiscan Ecu Cracked Feet(14.04.2020)